WoodworkingBeltSander.Com
Welcome to another FREE Woodworking Resource sponsored by your fellow
woodworkers at Shopsmith

BELT SANDER
Intro
Belt Sander Setup & Features
Abrasive Belts
Belt Sander Safety
Belt Sander Speeds
Surface Sanding
Sanding Large Stock
Edge Sanding
End Grain Sanding
Vertical Belt Sanding
Sanding Miters and Bevels
Sanding Chamfers
Sanding Convex and Concave Curves
Sanding Compound Curves and Odd Shapes
Helpful Wood Sanding Hints

Belt Sander
Click the following for a printer friendly version of Tip
- Pg. 1-4, Pg. 5-8, Pg. 9-13

Abrasive Belts

Click to see larger view
Figure 19-4. Two ways to store sanding belts. Don't allow them to kink or become dirty.

Abrasive belts are available in three grits: coarse, medium, and fine. The belt sander accepts abrasive belts 6" wide by 48" long. Often, there are slight inconsistencies from belt to belt; some are slightly longer than 48", some shorter. The automatic belt tensioning feature compensates for this. There's no need for you to readjust the distance between the drums every time you change a belt, unless you use a nonstandard belt.

The grit you choose depends on the work you have to do. Remember that for the smoothest surface possible, always work your way from coarse to fine grits.

Belts should be carefully stored by using one of the methods shown in Figure 19-4.

Continue to Belt Sander Safety
Back to Belt Sander Setup and Features

 

Send For Your FREE Woodworking Fact Kit and "Sawdust Therapy" TV Show.

First Name*:
Last Name*:
Street Address*:
 
City*:
State*:
Zip*:
Country*:

USA Canada
Other

E-mail Address*:

  2009 Shopsmith Inc. All rights reserved.

Policies | Contact Us | Links | Corporate Web Site